基于局部放电法的矿用高压电缆信号去噪算法研究

干扰噪声直接影响局部放电法有效检测矿用高压电缆故障。基于局部放电法，综合采用理论计算、仿真实验、现场试验的方法，对比分析了短时傅里叶变换和傅里叶分析去噪法的原理和优缺点，提出了一种矿用高压电缆的局部放电去噪算法——小波阈值去噪法，同时，选择了合理的阈值函数和去噪流程。基于此，采用白噪声和连续周期信号作为高压电缆的干扰噪声，进行了模拟仿真实验。结果表明，小波阈值去噪法可有效抑制白噪声，其中，Db2小波性能和去噪效果最好；同时，现场试验结果显示，去噪后信噪比得到了显著增加，验证了小波阈值去噪法的合理性和可靠性。     

Multi-Purpose Forensics of Image Manipulations Using Residual- Based Feature

The multi-purpose forensics is an important tool for forge image detection. In this paper, we propose a universal feature set for the multi-purpose forensics which is capable of simultaneously identifying several typical image manipulations, including spatial low-pass Gaussian blurring, median filtering, re-sampling, and JPEG compression. To eliminate the influences caused by diverse image contents on the effectiveness and robustness of the feature, a residual group which contains several highpass filtered residuals is introduced. The partial correlation coefficient is exploited from the residual group to purely measure neighborhood correlations in a linear way. Besides that, we also combine autoregressive coefficient and transition probability to form the proposed composite feature which is used to measure how manipulations change the neighborhood relationships in both linear and non-linear way. After a series of dimension reductions, the proposed feature set can accelerate the training and testing for the multipurpose forensics. The proposed feature set is then fed into a multi-classifier to train a multi-purpose detector. Experimental results show that the proposed detector can identify several typical image manipulations, and is superior to the complicated deep CNN-based methods in terms of detection accuracy and time efficiency for JPEG compressed image with low resolution.     

Modified transform-based gamma correction for MRI tumor image denoising and segmentation by optimized histon-based elephant herding algorithm

Medical image processing is typically performed to diagnose a patient's brain tumor prior to surgery. In this study, a technique in denoising and segmentation was developed to improve medical image processing. The proposed approach employs multiple modules. In the first module, the noisy brain tumor image is transformed into multiple low- and high-pass tetrolet coefficients. In the second module, multiple low-pass tetrolet coefficients are applied through a modified transform-based gamma correction method. Generalized cross-validation is used on multiple high-pass tetrolet coefficients to obtain the best threshold value. In the third module, all enhanced coefficients are applied to the partial differential equation method. In the final module, the denoised image is applied to Atanassov's intuitionistic fuzzy set histon-based fuzzy clustering method with centroid optimization using an elephant herding method. Accordingly, the tumor part is segmented from the nontumor part in the magnetic resonance imaging brain images. The method was assessed in terms of peak signal-to-noise ratio, mean square error, specificity, sensitivity, and accuracy. The experimental results showed that the suggested method is superior to traditional methods.     

Polarity Effect and Electromagnetic Radiation of Partial Discharge Accompanying Growth of Electrical Tree

We have investigated the characteristics of radiated electromagnetic (EM) waves from positive and negative partial discharges (PD) in epoxy resin and cross‐linked polyethylene. We found that there is a correlation among the EM level from PD, the positive PD current, and electrical trees. Therefore, the growth of an electrical tree produces a lot of positive PD. We have also investigated the characteristics of the frequency region of EM waves from PD in air, insulating oil, and liquid epoxy in addition to the above insulators. EM waves were detected in the frequency region of 40 MHz to 300 MHz from positive and negative PD in epoxy resin and cross‐linked polyethylene. EM waves were also detected in the frequency region of 40 MHz to 150 MHz from positive and negative PD in air. In the case of insulating oil and liquid epoxy, EM waves were detected in the frequency regions of 40 MHz to 150 MHz from positive PD, and 40 MHz to 250 MHz from negative PD. The frequency region differed depending on the material and the discharge polarity. Our investigation indicates that the cause is differences in electric field strength at the time of PD occurrence.     

A rapid method to quantify casein in fluid milk by front-face fluorescence spectroscopy combined with chemometrics

Casein in fluid milk determines cheese yield and affects cheese quality. Traditional methods of measuring casein in milk involve lengthy sample preparations with labor-intensive nitrogen-based protein quantifications. The objective of this study was to quantify casein in fluid milk with different casein-to-crude-protein ratios using front-face fluorescence spectroscopy (FFFS) and chemometrics. We constructed calibration samples by mixing microfiltration and ultrafiltration retentate and permeate in different ratios to obtain different casein concentrations and casein-to-crude-protein ratios. We developed partial least squares regression and elastic net regression models for casein prediction in fluid milk using FFFS tryptophan emission spectra and reference casein contents. We used a set of 20 validation samples (including raw, skim, and ultrafiltered milk) to optimize and validate model performance. We externally tested another independent set of 20 test samples (including raw, skim, and ultrafiltered milk) by root mean square error of prediction (RMSEP), residual prediction deviation (RPD), and relative prediction error (RPE). The RMSEP for casein content quantification in raw, skim, and ultrafiltered milk ranged from 0.12 to 0.13%, and the RPD ranged from 3.2 to 3.4. The externally validated error of prediction was comparable to the existing rapid method and showed practical model performance for quality-control purposes. This FFFS-based method can be implemented as a routine quality-control tool in the dairy industry, providing rapid quantification of casein content in fluid milk intended for cheese manufacturing.     

In situ monitoring of the biocatalysed partial hydrolysis of cocoa butter and palm oil fraction

Partial glycerides are widely used ingredients in confectionery products that can be produced from natural fats. In a biocatalytic partial hydrolysis of cocoa butter and palm oil fractions, a product mixture containing 1.5% monoglycerides and 5.5% diglycerides intended for the use in confectionery products was created. This study is a proof of principle that shows the feasibility of monitoring the biocatalytic partial hydrolysis of these two natural fats in situ with ATR-FTIR spectroscopy. An economic approach was utilised for calibration since partial glyceride calibration standards are costly and poorly available. The released compounds were quantified by means of chemometric modelling, and the model was validated with gas chromatography. Resulting root mean square errors were in the low per cent range. Additionally, the results indicate that distinction of the released free fatty acids is possible with ATR-FTIR spectroscopy.     

Effects of isothermal treatment parameters on the microstructure of semisolid alloys

Cold-rolled 6061 aluminium alloys are used to prepare semisolid billets by recrystallisation and partial melting. The effects of isothermal treatment parameters on the microstructures were investigated. The results indicated that the high isothermal holding temperature increases the experimental liquid fraction, average grain size and shape factor. A long isothermal holding time also increases the experimental liquid fraction and improves the spheroidisation degree of solid grains, but the average grain size also increases. Moreover, when the isothermal holding time at high temperature is increased, the size of intragranular liquid droplets increases, but their quantity decreases. The optimal isothermal holding temperature and time during semisolid isothermal treatment were 635°C and 5?–?10?min, respectively.     

An enhanced state estimation for linear parabolic PDE systems with mobile sensors

This paper studies an enhanced state estimation problem of distributed parameter processes modeled by a linear parabolic partial differential equation using mobile sensors. The proposed estimation scheme contains a state estimator and the guidance of mobile sensors, where the spatial domain is decomposed into multiple subdomains according to the number of sensors and each sensor is capable of moving within the respective subdomain. The state estimator is desired to make the state estimation error system exponentially stable while providing an performance bound. The mobile sensor guidance is used to enhance the transient performance of the error system. By the Lyapunov direct technique, an integrated design of state estimator and mobile sensor guidance laws is developed in the form of bilinear matrix inequalities (BMIs) to meet the desired design objectives. Moreover, to make the performance bound as small as possible, a suboptimal enhanced state estimation problem is formulated as a BMI optimization one, which can be solved via an iterative linear matrix inequality algorithm. Finally, numerical simulations are given to show the effectiveness of the proposed method.     

Partial safety factors for laminated glass

Glass plies can be bonded together by polymeric interlayers to form laminated glass. Thanks to the capacity in finding alternative stress paths after partial breakage, it is commonly accepted that the more the layers are, the higher the safety level is. However, a negative aspect is that the tensile strength of glass carries a size effect in terms of surface area, which increases with lamination. Here we evaluate these competing factors by calibrating the partial safety factors to be used in semi-probabilistic (level-I) design, through comparison with probabilistic (level-III) methods in paradigmatic case-studies under wind, snow, and dead weight. Starting from a two-parameter Weibull distribution for glass strength, the “failure modes” approach determines the statistical distribution of strength for a multi-laminate as a function of the number of plies, which interferes with the statistics for actions. As a function of the target probability of failure for the assigned class of consequence, we introduce a new coefficient in the verification formula of level-I, to account for the effects of lamination with dependence upon the number of plies. We find that there is strong gain when passing from a monolith to a two-ply laminate, but the advantage fades by increasing the number of layers. Verification formulas of this type could avoid overconservative design.     

Proposed network structures and combined adaptive algorithms for electrocardiogram signal denoising

An electrocardiogram (ECG) signal is a record of the electrical activities of heart muscle and is used clinically to diagnose heart diseases. An ECG signal should be presented as clear as possible to support accurate decisions made by doctors. This article proposes different combinations of combined adaptive algorithms to derive different noise-cancelling structures to remove (denoise) different kinds of noise from ECG signals. The algorithms are applied to the following types of noise: power line interference, baseline wander, electrode motion artifact, and muscle artifacts. Moreover, the results of the suggested models and algorithms are compared with those of conventional denoising tools such as the discrete wavelet transform, an adaptive filter, and a multilayer neural network (NN) to ensure the superiority of the proposed combined structures and algorithms. Furthermore, the hybrid concept is based on dual, triple, and quadruple combinations of well-known algorithms that derive adaptive filters, such as the least mean squares, normalized least mean squares and recursive least squares algorithms. The combinations are formulated based on partial update, variable step-size (VSS), and second iterative VSS algorithms, which are considered in different combinations. In addition, biased NN and unbiased linear neural network (ULNN) structures are considered. The performance of the different structures and related algorithms are evaluated by measuring the post-signal-to-noise ratio, mean square error, and percentage root mean square difference.